soundcard problems??

Welcome to Old Skool Anthems
The Old Skool Resource. Since 1998.
Join now

norriss

Member
Aug 25, 2004
602
0
16
53
Derby
I have a creative sound blaster pci 5.1 soundcard and i recently installed mixvibes v5.11 and im trying to configure my soundcard so i can cue up next track without recording whats on headphones. i looked on there forum a managed it but headphone volume is very low. ive checked my volume controls on windows and i cant seem to sort it and im pulling my hair out.

heeeeelp
 

turpieaj

Active member
Feb 15, 2003
2,389
1
36
52
sunshine on Leith, via Watford
cant help on the mix vibes thing as I use traktor but some peeps on here just helped me out with the same sort of question - you need to make sure you have your rear channels activated and use the rear channels for the monitoring and cueing allowing the front channels for the usual output sound. There should be some options allowing you to change the settings in mix vibes tho to allow this?

Andy
 

norriss

Member
Aug 25, 2004
602
0
16
53
Derby
what d'ya reckon to traktor? i've downloaded it and couldn't seem to get on with it. with mixvibes it seems you get the feel more like they are real decks you can bend the pitch so you can keep the tracks more in time. haven't really had a good go with traktor tho
 

turpieaj

Active member
Feb 15, 2003
2,389
1
36
52
sunshine on Leith, via Watford
The only other software I have had a chance to tinker with apart from traktor was the earlier versions of visiosonic djpc red edition and I thought that was a load of pap.:) kept locking up and crashing.
Its what suits the individual at the end of the day.

Andy
 

norriss

Member
Aug 25, 2004
602
0
16
53
Derby
i agree m8... how do i activate the rear channels tho. do i do it through windows or do i do it through the mixvibes
 

turpieaj

Active member
Feb 15, 2003
2,389
1
36
52
sunshine on Leith, via Watford
Ive an audigy 2, so in your creative task bar for the live software there should be "Speaker set up" option yours at the moment is probably set to 2.1 just change it to 5.1 and bobs your uncle. Go into mix vibes somewhere there should be audio setup just change the settings for the montor/cueing channel to rear speakers (if you have rear speakers, remove the jack from your soundcard and plug the phones in there mate:thumbsup: )

Andy
 

norriss

Member
Aug 25, 2004
602
0
16
53
Derby
i found out line in on my soundcard is also rear out after hours of searching :fekked: so i have my speakers from line out and headphones in line in. havent tried it yet cause she's watching telly hope it works.